Page 1 of 1
Type 2 ECU hcr32 rb25det help
Posted: Tue May 03, 2011 1:48 pm
by whitebnight
All greetings.
I from Russia so there will be problems with transfer and understanding me. But nevertheless I with you on ) NisTune Russia ))
Where to find a standard insertion for r33 rb25det?
Has filled in here it, the Computer has passed in emergency operation. Turns didn't rise above 2000
R32_transplanted_R33maps2_full.bin
Has then filled in what that rb25.bin it began to be dispersed, but braking on sharp switchings of transfer as ка on not stitched brain from rb25de and when slowly you roll on a court yard tries to decay.
That will be with VCT and whether the motor without differences will work.
Probably at first to go without the controler?
Re: Type 2 ECU hcr32 rb25det help
Posted: Tue May 03, 2011 2:48 pm
by Matt
Email me for a standard BIN for HCR32 RB25DET. We only provide the ENT files to reprogram the board on the forum
Re: Type 2 ECU hcr32 rb25det help
Posted: Tue May 03, 2011 3:57 pm
by whitebnight
Matt wrote:Email me for a standard BIN for HCR32 RB25DET. We only provide the ENT files to reprogram the board on the forum
whitebnight@mail.ru
Re: Type 2 ECU hcr32 rb25det help
Posted: Wed May 04, 2011 2:08 pm
by whitebnight
Thanks for help Matt, insertion has loaded.
The car has gone) there is a problem with VCT, the engine in two intervals brakes.
One more question: How to keep an insertion in NISTune boards? When you switch off the engine, it doesn't remain.
Re: Type 2 ECU hcr32 rb25det help
Posted: Wed May 04, 2011 2:51 pm
by bachig24u
whitebnight wrote:Thanks for help Matt, insertion has loaded.
The car has gone) there is a problem with VCT, the engine in two intervals brakes.
One more question: How to keep an insertion in NISTune boards? When you switch off the engine, it doesn't remain.
1. Synchronise to Nistune memory (insertion temporary, turn off, brain gone)
2. Burn to nistune ROM. (turn off, Brain keep, insertion permanent)
look picture joined
Re: Type 2 ECU hcr32 rb25det help
Posted: Wed May 04, 2011 7:00 pm
by Matt
VCT not in HCR32 ECUs. You need an aftermarket VCT module
Yes you need to use the 'burn' button to keep the changes
Re: Type 2 ECU hcr32 rb25det help
Posted: Thu May 05, 2011 9:14 pm
by whitebnight
bachig24u Thanks for a bright example )
All works! I am glad)
In what a difference of these controlers?
Who will help to buy? There there is no delivery to Russia (
http://shop.ebay.com/i.html?_nkw=Buddy+ ... m270.l1313
Re: Type 2 ECU hcr32 rb25det help
Posted: Fri May 06, 2011 10:01 am
by PL
I've not used these but apparently they will work.
http://www.summitracing.com/parts/SUM-830452/
PL
Re: Type 2 ECU hcr32 rb25det help
Posted: Mon May 09, 2011 1:33 am
by whitebnight
Who established to itself(himself)?
As it to connect to VCT + ECU is more detailed.