drag race tune help please!

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
darkside1
 

Posts: 2
Joined: Mon May 23, 2011 5:37 am

drag race tune help please!

Post by darkside1 »

i am having trouble with my tune for my drag race only z31. the car keeps breaking up for about .7 seconds after each shift. i think it is loading up with fuel. any insight would be greatly appreciated. i need to get this figured out soon, my first points race is Sunday the 29th. here is a list of my mods:

8.3:1 vg30
holset hx35@18psi for now.
porsche 944 intercooler
HKS ssqv BOV
full radius cut valves and seats
.440 schenider turbo cams+ springs
pathfinder intake
MB 420cc injectors
Mallory 1:1 FPR @46psi base
255lph pump
~98 octane unleaded
cobra MAf
3" x 3ft long exhaust straight pipe. no muffler, no cat
zeitronix wideband
nistune on 84t ECU

attached is my .bin file any input is appreciated. Thank You.
Attachments
5-6-11conservative.bin
1st pass
(16 KiB) Downloaded 149 times
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: drag race tune help please!

Post by Matt »

Do you have a log file with AFRs showing when the problem happens?
darkside1
 

Posts: 2
Joined: Mon May 23, 2011 5:37 am

Re: drag race tune help please!

Post by darkside1 »

i do not. i can tell you that i shift at 6400 rpm and as soon as i shift and get back on the throttle it starts to break up. i think i might have it too rich in the upper left part of the fuel map and it is dumping too much fuel in when i let off of the throttle during the shift. if i slowly roll onto the throttle it isn't as bad. And yes my BOV is recirculating to before the turbo after the MAF.
Bernardd
 

Posts: 253
Joined: Thu Jan 26, 2006 3:20 am

Re: drag race tune help please!

Post by Bernardd »

It looks like you have the stock vq map with cobra maf.
Post Reply