Page 1 of 1
Which ADR file to use?
Posted: Wed Sep 07, 2011 2:36 am
by revolutionz_s13
Quick question, something quirky I just noticed...My ECU label says its a 69F01, but when I connect my consult cable, it shows up as a 69F00...which ADR file should I be using?
Re: Which ADR file to use?
Posted: Wed Sep 07, 2011 12:27 pm
by Matt
Use the S14 SR20 address file. There is only a minor difference in part numbers so your board was supplied with 69F00
Re: Which ADR file to use?
Posted: Wed Sep 07, 2011 1:41 pm
by revolutionz_s13
Thats kind of what I thought. What base map should I be building off of then? I have been working off of the 69F00 basemap, but it seems sometimes that some of the things like the warm/cold idle enrichment dont really seem to do anything.
Re: Which ADR file to use?
Posted: Thu Sep 08, 2011 12:06 pm
by Matt
Warm/cold enrichment depends on the temp when cranking