How do you tune fuel maps!?!? Please help, major issues.
Posted: Wed Nov 23, 2011 3:59 pm
This has been one headache after another. Car is pretty much stock with a Z32 and bolt ons. After loading the stock 50F00 bin file, I change the MAF and the K Constant jumps to 37000ish thousand. This will NOT start my car. 60000ish K Constant will, but once car is warm, AFRs are 8-8.5, so I must bring the K down to around 21000 to bring my AFRs to 14-15. This in turn will not allow the car to rev above 1000rpms because there is not enough fuel through the RPM band. So, with that being said, how can I pull fuel in the fuel maps while leaving my K Constant at 60000? I've read the user guides several times and they have been no use to me. Crank enrich does nothing for me. I've had 0-30 degrees at 120% with no luck. Also, vacuum is way to high at idle, 10in Hg. Motor has new Wiring Specialties harness and new CAS. Any help is appreciated!