Nistune Forums

Hey Guys,
I'm finally getting around to installing my board and doing the z32 ECU mod to run my RB25.

I went down to frys electronics and picked up a 2k resistor but i am unsure if this is the correct one. Wanted to get confirmation before i begin soldering things.

Thank You.

Looks right

Yeah, i thought so to. Just want to get a confirmation that it is 100% the right one. Hate to solder it on and then come day of tuning get errors since it's the wrong size.

Can anyone else confirm?

It wont affect tuning at all, just removes the fuel temp dtc code from the ECU (and removes check engine light). Correct resistors