Page 1 of 1

Fuel Rail Check Valve = Fuel Pump Control Module ?

Posted: Sun Jan 29, 2012 8:48 pm
by louiswun
Is there any Fuel Pump Control Module in ER34 Neo RB25DET ?
I see there is a check valve on the fuel rail, looks like a fuel pressure regulator but at the entrence side of the fuel rail,
with a vaccume hose linking to the intake plenum,
Is that a device for limiting fuel supply on idle refere to vaccume, and full flow when on boost ?
I see the same design in VQ30 NA, VQ20 NA, RB25 Neo....

Re: Fuel Rail Check Valve = Fuel Pump Control Module ?

Posted: Mon Jan 30, 2012 4:43 pm
by PL
I think you'll find that there are 2 pressure dampers plus the usual fuel pressure reg. It's very confusing but if you check the service manual you'll see that it's a pretty standard system except for the extra 2 dampers.

PL

Re: Fuel Rail Check Valve = Fuel Pump Control Module ?

Posted: Fri Feb 03, 2012 10:24 am
by Matt
R34 service manual would tell you. Never had to look into this. There should be copies of this manual floating around online. Think I got mine from Skylines Australia