Nistune Forums

I am official tuner for Concept Z Performance, I am doing some experimentation on Nistune boards

I know that nistune software can make a ENT software from BIN file, but I need it other way around, ENT to BIN

I am trying to make nistune boards work on bmw ecus, and I got one file from bmw that I need it has xilinx encryption and I need to translate it

Nistune boards wont work on BMWs because in addition to the EPROM socket it needs R/W, A14, A15 and E (clock) which is the 4 pin CPU connector. Even if you find these lines and put a BMW image into the 32K NVRAM on the board you would need to construct special comms inside the BMW firmware to alter maps etc

I can create an ENT form a BIN file for you to put in the board however

Here will attach the 64kb file, there are two files in the zip folder, both of them are the same, you can only do one.

The bin file should starts with FF FF FF but for each line it is different data ofset, so you can see what code needs to be put in to ofset it, to display the data correctly.

Thanks

Matt any help with this?

Didnt have anything readily available to convert straight from BIN to ENT so just put something together then. Please try this out

thats not even close. I gave up the idea on using it on bmw. So far we have 10 boards sitting here, still haven't sold a single nistune board.

Can you shoot me an email. Is your workshop listed on our website? Are you advertising etc?