NIStune 0.90107
Posted: Tue Mar 13, 2007 1:04 pm
Another update
- Fixes for Zexel ECUs (Diesel) and perhaps other Consult-II ECUs to stop dropping out during high revs when data is not received in time
- Addition of CPU=2 for Zexel ECU for RPM adjustjment only using a single register and different mutliplier
- Fixes to recognise COM10-COM255 which was not being recognised due to special codes required by windows. Tested on COM10 and COM12
- Fixed a spelling typo in WinXP/2000 USB drivers INF install file. Spelt 'communications' wrong
Latest versions do not include address files. If you need one email me darkhalf@aanet.com.au
** I'm currently looking into knock sensing detection and display for various ECUs, and also indicating currently active fuel/timing maps. Esp for Z32 this is a necessity to know which map the ECU is accessing. Also increasing RAM trace speed for consult (8x) / extended consult (16x)
- Fixes for Zexel ECUs (Diesel) and perhaps other Consult-II ECUs to stop dropping out during high revs when data is not received in time
- Addition of CPU=2 for Zexel ECU for RPM adjustjment only using a single register and different mutliplier
- Fixes to recognise COM10-COM255 which was not being recognised due to special codes required by windows. Tested on COM10 and COM12
- Fixed a spelling typo in WinXP/2000 USB drivers INF install file. Spelt 'communications' wrong
Latest versions do not include address files. If you need one email me darkhalf@aanet.com.au
** I'm currently looking into knock sensing detection and display for various ECUs, and also indicating currently active fuel/timing maps. Esp for Z32 this is a necessity to know which map the ECU is accessing. Also increasing RAM trace speed for consult (8x) / extended consult (16x)