Nistune Forums

Posted: **Thu Apr 05, 2012 9:51 pm**

Version 0.10.15

Running through the bug list this week. Next updates will start again next week after a long easter weekend

Fixed bugs:
Autotune view crashes on 0.10.14. Duplciate resource IDs
Innovate crashes on disconnect
Update installer to remove old address files from Documents\Address directory
Verify 70Y05 B13 SR20 1993 low AFM voltage
Fix up zexel ECU issues and re-test on bench [Requires in vehicle verification]
Fix comflicting Z32 diode install on VLT/Z31 ECU
Consult raw register window only displays 22 items. Increase vertical sizing
Documentation updates - put date next to document
RD28 RPM calc update
AFR LHS gauge no markings on innovate in vehicle
Check max AFR on innovate issue resolved
Add S14A SR20DET address file to package
Add gear/knock copy for Z32 since gear/knock map not copied
S12 CA18ET change MAF broken. Writes 64 point over 56 corrupting ROM
S12 CA18ET address file and ECU look uprequires separate definition
Verify Zexel boost readings
Zeitronix user input 2 working and ZT-3 updates [Requires wideband user testing]
DLP with UEGO voltage difference issues / move around [Tested and rejected]

Enhancements:

Emulator offset adjustable inside File > Config
Update consult connect and lambda icons

I need zexel diesel tested for gauges coming up correctly and Zeitronix User-2 input since I dont have full capability on the bench with these items

Posted: **Sun Apr 08, 2012 2:38 am**

MAF translation graph seems incorrect.

Posted: **Sun Apr 08, 2012 7:32 am**

louiswun wrote:MAF translation graph seems incorrect.

yes it does.
at least in the s13 CA18DET ECU it's incorrect, the scales. the graph itself seems to be the same as before.

Posted: **Sun Apr 08, 2012 11:07 pm**

okay will have a look. was in the middle of trying to fix the tracing on this one. I cant seem to work out the scaling properly yet for this. H/W maptracing doesnt match when you change the cell values from my testing so far

Posted: **Mon Apr 09, 2012 4:34 am**

Hi Matt,

E-mail send to enquiries @ nistune .com
please check !
Thx !

Posted: **Mon Apr 09, 2012 11:35 pm**

Is the MAF display supposed to have gone out of scope in 0.10.15?

maf-goneoffscreen.jpg: (331.65 KiB) Downloaded 2239 times

nistune crashed on the first instance;
installed 0.10.15 over the top of 0.10.13.
opened a VLT addy and split 32k bin, chose 'ROM 2' from drop down list. noticed MAF transfer out of scope.
swapped to a 16k stock bin and then nistune stopped working.
sorry no debug as it didn't activate debug until the second time I opened 0.10.15

Posted: **Thu Apr 12, 2012 11:38 pm**

Out of scope issue may have caused the crash when opening a file whilst you had the VQ map displayed. If you opened one file, then opened the VQ map then opened the next it would have done the rescale then triggering the crash

Nistune Forums

Nistune 0.10.15 Release

Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release

Re: Nistune 0.10.15 Release