AFRs at dump vs exhaust (external)
Posted: Mon May 14, 2012 2:00 pm
Doing some Innovate LC1 + LM2 daisy chain testing today but with two wideband sensors installed differently
LC-1 is in the dump pipe but LM-2 is in the exhaust. About 0.2 AFR difference (leaner reading at exhaust)
Mostly these stay consistent except for on decel due to air fluctuations in the exhaust. Probably about the second time I've linked the innovate into each other but they seem to work well (apart from one empty selection item in the drop lists)
LC-1 is in the dump pipe but LM-2 is in the exhaust. About 0.2 AFR difference (leaner reading at exhaust)
Mostly these stay consistent except for on decel due to air fluctuations in the exhaust. Probably about the second time I've linked the innovate into each other but they seem to work well (apart from one empty selection item in the drop lists)