Nistune Forums

Can you check the 1x playback speed of the log player please. I'm using version 0.10.20 at the moment.
I was trying to compare the Nistune data log to my Race technology data log,but the Nistune log is playing too fast to stay in sync. On my laptop it's running approximately 65s per timed minute on my stop watch where as The Race technology player seems to be actual real time.

Just realised as well the speed is out of sync too. In one log the .csv file shows 102mph but the log player/consult gauges only reach 96mph and never shows 102mph. It seems to be around 5mph out in alot of places.

How often does the speedo update as it seems to sit on some speeds for round .4-.8s when in that time I could have accerated around 10mph.

Post the log file here. Are you logging in tuner mode or stream mode?

Tuner mode updates can be very slow and can be only several times per second. Try again in stream mode when logging

I've noted this as an issue for the playback rate being slightly faster and will check the sleep time loops on record and on plackback to make sure they are consistent. Appears they may be out slightly from what you describe

if changes are made with log player open, nistune crashes also.
the page by page button still moves in small increments.

Here's an extract from the file. The whole file is a 28min log, so abit big.

The little box says Tuner so does that mean I'm in tuner mode or click to go into Tuner mode? What's the difference between the two modes (I'm a complete novice at this.)

if changes are made with log player open, nistune crashes also.

Changes to the maps? Or changes somewhere else? when the log player was open was it recording or playing back?

all of the above.
I've lost track which debug log to send now, got so many. too far behind on this project.
when I eventually catch up I'll try and assist with more debugs & ms events that you need.