Page 1 of 1
Type 1 orders
Posted: Fri Apr 13, 2007 3:36 pm
by Matt
Just to let everyone know... batch of Type 1 boards were shipped off Wednesday and a couple today
I have a bunch of boards left still from those who havent responded yet from the waiting list
Hardware documentation updated today for the 1988-89 Z31 ECUs. I had the pin ordering backwards in the previous rev of the document. More photos to be added as I did an install today
Posted: Tue Apr 17, 2007 5:43 pm
by Zen
Hooyah!
Posted: Wed Apr 18, 2007 11:30 am
by cheezmonta
Mine arrived yesterday safe and sound.
Can't wait to get it installed and start tinkering!!
Posted: Thu Apr 19, 2007 1:56 pm
by NIVO
I got mine today!
Posted: Fri Apr 27, 2007 1:13 am
by ByReaL
Mine arived today, verry happy it had arived in time.
a little feedback on the delivery:
- a socket is included and it is inserted on the board (board pins were protected)
- it should be a piece of poliester (i do not know if this is the corect word, is something like chease but sinetic) and you should insert teh socket pins in that piece of material this way bending them will be prevented.
- a line on webiste shopuld be included stateing (no usb calble included)
this feedback are only to help you improve the product in all the posible ways, (said that just not to be misunderstood and you belive i'm not happy with the product)
i'll test it tonight and post more feedback.
Posted: Fri Apr 27, 2007 11:27 am
by Matt
Thanks for the feedback
I have been trying to get some black foam to push the boards into... and managed to get some this week. This way you can push the pins of the board into it and protect them. Future boards will be packaged using the foam
(For your board, the socket provided was connected as an intermim measure to protect the board pins)
Normally a USB cable is included with the board, but unfortunately I ran out of stock and it was a week away from the next batch of 50 to arrive, so to get delivery on time I shipped that board without one
Posted: Fri Apr 27, 2007 12:27 pm
by JimmyZ89
I received mine April 17th and everything came just fine. I got mine with the black foam to protect the pins. Installed it a couple days later minus the usb port at work just to try it out. Car fired up and idled just fine but that's as far as I got with it so far. Still need to install the usb port into the ecu case and start logging my drive.