Nistune Forums

First thing I've downloaded the latest version of nistune, now when I go to change something Nd burn it to the ecu the program freezes and I have to close it via task manager. Never had this issue before,

I've had a total flat battery and it now seems the Map I've put in isn't there And has reverted back to standard map... I'm having to resize injectors every time the battery's flat...

It now thinks that the p11 turbo map I've been using is for and RNN14 and sees it as a mismatch.... I was wanting to adjust the crank enrich now its not even close to starting.

Surely I don't have to upload the map every time I get a flat battery.

Revert back to 0.10.19 if you are using the latest test versions. Several people have had the issue. I've fixed that issue but have to close out a few more things before uploading a 0.10.21 version

Ok understood. Is there another way of getting round the lack of starting
On its own without the crank enrich table as that's not available for the p11
Sr20de on the older version.

I can get round that until the dyno run is finished but obviously a bit impractical pulling the fuel pump fuse out to. Start all the time.

Cheers matt

Version 0.10.19 has the crank enrich tables. I added those recently for P11