Enable VCT on RB20 ECU?

[djstatic]

I saw a vauge post on S:AU about a tuner using one of these:
http://m.summitracing.com/parts/SUM-830452

To enable VCT on a RB25DET with a RB20 ECU.

Is it possible? If so, can some one post up a how to guide?

[Matt]

There should be instructions with the unit. It would take 12V, GROUND and RPM (CAS) signal and then an output signal to the VCT solenoid so wire those into your ECU loom

[CoZZm0]

Guys use those on the SR20VE's for activating VVL too.