Nistune Forums

Hi guys,

Ran a log file and it seems to show im running on the knock timing. Any feedback is very welcome. No DTC shown, or knock values recorded.

R32 GTS T HKS GT2540 13PSI

Its fine - its on the only timing map (actually is the main timing map for this ECU)

Perhaps time to upgrade your Nistune to 0.10.21? In this version it will show main timing map as (Unused) and rename 'Knock Timing Map' to 'Timing Map'

With the 04U01 ECU you have there is only a single timing map. It just happens to live in the same location as 'knock timing' map on the later HCR32 ECUs hence confusing things. I've tried to make this more obvious in the later versions by automatically greying out the 'unused' map and renaming the knock timing map for these earlier HCR32 ECUs

Thanks Matt. The version I was using was the latest 0.11 Aug 30 2012 build.

I noticed the greyed out map. The other TADV: Ignition timing (knock) .The (knock) in brackets is what confused me.

Thanks again for clearing that up