Page 1 of 1
Z32 TT running lean.
Posted: Sat Jul 13, 2013 5:58 am
by charlvdw
Hi guys, I did do a quick search but with no real luck.
My car is running lean around 70degree C. Which table/s do I change, I do not want to change the main fuel map to much as the car runs o k during summer.
Re: Z32 TT running lean.
Posted: Sun Jul 14, 2013 4:52 pm
by Matt
Strange issue. If you wanted to adjust for this in the ECU then cold and warm enrich tables
Right click and copy to partner to make both the same (one is crank < 15 degC and other crank > 15 degC)
Re: Z32 TT running lean.
Posted: Mon Jul 15, 2013 1:20 am
by charlvdw
Thanx Matt, I would presume that the cold enrich would be timing less the 15degrees?
Re: Z32 TT running lean.
Posted: Tue Jul 16, 2013 10:23 am
by Matt
Degrees is the coolant temp in Celsius. It uses that temp value on last crank to determine which table to access. To make things easier both tables should have the same values so this does not affect your adjustments
Re: Z32 TT running lean.
Posted: Tue Jul 16, 2013 4:59 pm
by charlvdw
I should read what's being said, sorry for a stupid question and thanks for clarifying.
Re: Z32 TT running lean.
Posted: Tue Jul 30, 2013 4:21 pm
by charlvdw
Found the problem.
It seems there is a bit of a problem with the analog outputs on my Innovate's which I was using for narrowband simulation, as soon as I reconnected the std narrowband everything was sorted.
Another good thing that came from this is that I found another 4 small boost leaks.