Page 1 of 1
Plug for GTR35 AFM ?
Posted: Tue Jul 23, 2013 7:24 am
by louiswun
Hi, could this plug fit in GTR35 AFM ?
Thank you !
Re: Plug for GTR35 AFM ?
Posted: Wed Jul 24, 2013 1:47 pm
by Matt
It looks like it. 6 pin connector. Do you have a source for those plugs at all? Its the main thing preventing us from using these AFMs
Re: Plug for GTR35 AFM ?
Posted: Thu Jul 25, 2013 4:20 am
by louiswun
Matt wrote:It looks like it. 6 pin connector. Do you have a source for those plugs at all? Its the main thing preventing us from using these AFMs
Will ask and let you know !
Re: Plug for GTR35 AFM ?
Posted: Thu Jul 25, 2013 3:57 pm
by louiswun
Ask the seller for 4 pieces and he got it.
It is used, removed from China made Nissan Tiida.
How many pieces do you want ?
Do you want me to test fitting before ordering, I haven't try fitting on GTR35 AFM ? (order the first time for less quantity, if not fit, less money lost)
I have also found some china made slot type AFM, I,m think to remove the sensor inside and replace with a genuine GTR35 AFM.
Replacement for Parts number 22680-7S000 | 22680-CA000 | 22680-AW400
Will ask the seller to source the housing only.
Also found aluminium tube with slot type flange, will ask the tube ID.
Re: Plug for GTR35 AFM ?
Posted: Thu Jul 25, 2013 4:07 pm
by louiswun
Aluminium tube with slot flange, seller replied tube ID is 76mm
I think buying this or the china made plastic housing, plus the Tiida plug, will save a lot of time on frabcating
Re: Plug for GTR35 AFM ?
Posted: Thu Jul 25, 2013 8:03 pm
by Matt
They probably fit but would be best to test. Depends how much they are. I would look at buying about 10 myself since I know people are looking for them
The tube is good also since mine is 74mm ID
viewtopic.php?f=10&t=2428
These ones dont have a flange for the pod filter but most on ebay dont seem to have the Z32 MAF style bolt pattern so no flange is better than a wrong shape one
Re: Plug for GTR35 AFM ?
Posted: Sat Jul 27, 2013 3:36 am
by louiswun
Matt wrote:They probably fit but would be best to test. Depends how much they are. I would look at buying about 10 myself since I know people are looking for them
The tube is good also since mine is 74mm ID
viewtopic.php?f=10&t=2428
These ones dont have a flange for the pod filter but most on ebay dont seem to have the Z32 MAF style bolt pattern so no flange is better than a wrong shape one
Hi Matt, check mail please
Re: Plug for GTR35 AFM ?
Posted: Sat Jul 27, 2013 7:04 pm
by bachig24u
Boys,
Watch out for those cheap welded housings,
some aren't welded perpendicular or the jigs are off centre.
Re: Plug for GTR35 AFM ?
Posted: Mon Jul 29, 2013 12:02 am
by Matt
Thanks for letting me know. That one pictured does look a little off centered