Nistune Forums

#UNIT NAME
TYPE_UNIT,S13/RS13 (CA18DET) [32K REV3+ BOARD],*,*,*
#ENGINE SPECIFIC PARAMETERS
CYLINDER=4
ENGINECC=1800


corect value
ENGINECC=1809

----------------------------------------------------------------------------------
red and green lines should be switched


#HIGH/LOW octane Fuel map and scalers
HIGH_FUEL,&H3D00,16,16,256,1,High octane Fuel map
REG_FUEL,&H3700,16,16,256,1,Low octane Fuel map
TP_SCALE_FUEL,&H3BC0,16,1,16,1,TP scale (Fuel)
TP_SCALE_FIRE,&H3BE0,16,1,16,1,TP scale (Ignition time)

#HIGH/LOW octane Ignition time map and scalers
HIGH_FIRE,&H3C00,16,16,256,1,High octane Ignition time
REG_FIRE,&H3A00,16,16,256,1,Low octane Ignition time
RPM_SCALE_FUEL,&H3BD0,16,1,16,50,RPM scale (Fuel)
RPM_SCALE_FIRE,&H3BF0,16,1,16,50,RPM scale (Ignition time)

picky!

yeah i usually group the scalers to the maps now...

as opposed to the rom editor method of keeping all the scalers

especially when you have boost and VE maps / scalers in the later model ecus

done....