looking for some feedback on my tune
Posted: Tue Feb 25, 2014 2:17 pm
Hello all yea nistune up & running on my l28et z31 ecu 88/na for zirc02. mtxl wide band does not play well with ecu for emu tried the voltage offsets from other members post but no go works for a while then just goes lean. installed bung for orig 02 custom down pipe open exhaust 2.5 short out the side
t3/04 13psi want to run 18psi intercooled bov to atm
ford/bocsh 437cc injectors 0280150400
ford maf E9SF proM curve 19, 70mm housing could prob use some work here as i use the jwt in the
drop down. i started with the Z31_VG30ET_1988_26P00_MT_SS.bin resized injectors, changed maf
pulled some timing from the high load area's prob need to pull some more from 3000 to 4000 area's
but car runs great pulls hard. so if ya got some time here's the bin file and log. idle, pull thru the gears, cruzin and two pulls in forth. hope i'am pointed in the right direction more reading n tuning
what a blast
t3/04 13psi want to run 18psi intercooled bov to atm
ford/bocsh 437cc injectors 0280150400
ford maf E9SF proM curve 19, 70mm housing could prob use some work here as i use the jwt in the
drop down. i started with the Z31_VG30ET_1988_26P00_MT_SS.bin resized injectors, changed maf
pulled some timing from the high load area's prob need to pull some more from 3000 to 4000 area's
but car runs great pulls hard. so if ya got some time here's the bin file and log. idle, pull thru the gears, cruzin and two pulls in forth. hope i'am pointed in the right direction more reading n tuning
what a blast