Type 3 Decel Loss, RPM, MAF and Temperature

UNISA JECS · Post by **UNISA JECS** » Wed Mar 12, 2014 5:43 pm

Hey Matt can you look into these, they seem to look like they make some sense, thanks.

Matt · Post by **Matt** » Sun Mar 16, 2014 5:40 pm

that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one

UNISA JECS · Post by **UNISA JECS** » Mon Mar 17, 2014 8:14 am

Matt wrote:that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one

Its a 92 and works under the 91-92 .ADR

Matt · Post by **Matt** » Mon Mar 17, 2014 9:39 am

I checked it out properly this morning. I've added different (incorrect) addresses for those parameters.

Not sure why now since the base addresses (used also for SR20DET) were correct. I've commented out those lines (attached)

Put this in your address folder

Nistune Forums

Type 3 Decel Loss, RPM, MAF and Temperature

Type 3 Decel Loss, RPM, MAF and Temperature

Re: Type 3 Decel Loss, RPM, MAF and Temperature

Re: Type 3 Decel Loss, RPM, MAF and Temperature

Re: Type 3 Decel Loss, RPM, MAF and Temperature