Page 1 of 1
Closed Loop Parameters (Issue)
Posted: Sun Mar 23, 2014 12:01 am
by UNISA JECS
Hi Matt I have reason to believe these tables are incorrect in there translation but I could be wrong but as is the tables highlighted in BLUE do not make much sense to me I also brought this up on my B14 ECU as well here
viewtopic.php?f=11&t=2764 but now I am tuning my B13 and I noticed more of the same, could you please look into this, I also came across a translation of this in nismotronics which makes more sense with reguards to RPM vs KMH
Re: Closed Loop Parameters (Issue)
Posted: Sun Mar 23, 2014 6:40 pm
by Matt
The RPM/Kmh has been fixed in the code now
Looks like you are trying to compare a Nismotronic bin against a standard Nissan one. They have changed various parameters from the factory ones in the 'base tunes' which means not all parameters will have the same values
Also I do not have the 'closed loop enable' Max RPM or Max MAF load
The ones on the right you are looking at are the 'closed loop transition' parameters which is a different set of parameters