Nistune Forums

As title, for replacing narrow band signal, if the wideband does not have 0-1V analog output.

Dear Louis,

I'm from HK too and use the Nistune to tune my GTR33 my for some years. If you want to use the wideband to replace the narrowband O2 signal like I did. You have to use a wideband system that equipped with narrowband simulation output like Innovate, Zeitronix, etc.

I use Zeitronix and its narrowband simulation signal to feed into the Nistune computer to replace the factory O2 signal. It's really good and much more accurate than the narrow band sensors.

Ringo (9377 4757)

Hi Ringo,

Thanks for your reply, I already have Zeitronix Zt-2, but I like the function of AEM wideband failsafe kit, but it does not have 0-1v narrowband simulation output, so trying to ask for help. After reading AEM instruction, found that it's analog output cannot be program to 0-1v, so I gave up, now I have brought Innovate MTX-L.