Page 1 of 1
rb25det s2 z32ecu tune
Posted: Thu Jun 05, 2014 1:19 pm
by boarderline
hey, I am very new to nistune. Working on getting my car to run good. I was wondering were or if anyone has some tune setups that they use on here that I could drop onto mine and tweak it from there. I have a rb25det with 550cc injectors, z32 maf, and a walbro 255l fuel pump. waste gate spring is set to about 10psi of boost. any suggestions?
Re: rb25det s2 z32ecu tune
Posted: Thu Jun 05, 2014 3:45 pm
by Ben C
Read the guides and go from there.
If you are going to be tuning you need to understand what is happening.
Re: rb25det s2 z32ecu tune
Posted: Thu Jun 19, 2014 7:52 am
by Torque
Hello,
Use the map which came with your Nistune ECU
Change the MAF / injectors in Nistune and check AFR ratios with a wideband.
That should be your base map.
From there you should visit a tuner/dyno or engage into (many) road tuning sessions.
You will need to read the manuals (Workshop/Tuner/..) provided on the Nistune website.