Nistune Forums

Anyone here have experience with Apexi PowerFc and rb25det ?
Can't find "official" forum/support for Apexi
Maybe someone here can help me ?
Have problem with idle.
With stock ecu car idles fine, TPS reporting about 370mV at idle, rpm about 650-700.
With PowerFC car don't want to idle and dies, until i set TPS to 800mV, but then ecu thinks that throttle is slightly open, and "idle" is about 1000-1100 rpm.
Can't start idle learning procedure, like it is advised in manual for PowerFC.

the only official forum I know of is the Datalogit group on Yahoo for datalogit owners, you get an invite when you buy one. A handy tool if your planning on doing any tuning of the PFC rather than using the hand controller

yep the hand controller should never be used for tuning. Half the tables are not accessible via the hand controller.