new to nistune from stock ca18det base map to 400bhp + map
Moderator: Matt
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
new to nistune from stock ca18det base map to 400bhp + map
Hi to all i am new to nistune i been running a base ca18det map , but now i got my mates 400bhp plus map ,i have loaded to my ecu but for some reason the car starts and drives and comeson boost all the way when with the base map boost , petrol and speed was limited
was this meant to happen ??
i should have to run it the following parts
720cc injectors
z32 maf
gt2871r
and some other mods for benerfit i got the tomei pon cams spec
260 duration
8.8mm lift
plus my hks gt2835r
what can i do to correct my map ??
was this meant to happen ??
i should have to run it the following parts
720cc injectors
z32 maf
gt2871r
and some other mods for benerfit i got the tomei pon cams spec
260 duration
8.8mm lift
plus my hks gt2835r
what can i do to correct my map ??
- Attachments
-
- 400BHP MAP.bin
- this is the file i have loaded in to my ecu with rc 750cc injectors and z32 and no results
- (16 KiB) Downloaded 283 times
Last edited by jks1customs on Sat Aug 02, 2014 12:23 pm, edited 1 time in total.
Re: new to nistune from stock ca18det base map to 400bhp + m
I don't really understand what is going wrong in the first sentance... after three re-reads
Do you have a tune and log file you can post here? Do you understand what is in your mates tune?
Do you have a tune and log file you can post here? Do you understand what is in your mates tune?
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
Re: new to nistune from stock ca18det base map to 400bhp + m
i have now uploaded the file can please anyone
what would be the injectors K value and latency of the 750cc rc injectors??
what would be the injectors K value and latency of the 750cc rc injectors??
Re: new to nistune from stock ca18det base map to 400bhp + m
The file appears to be invalid. Perhaps only the maps were synced from the board. Make sure ROM pack is installed when syncing maps
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
Re: new to nistune from stock ca18det base map to 400bhp + m
Ok thats good news for me as I was thinking that I had a damaged maf or bad injectors
Also I got the rc 750cc incjectors what would be the latency and k value on those
The map i am getting was meant to work with 720cc injectors and I got 750cc can I run it without any changes or should I manualy adjusts the k and latency then permanently burn it to my board ??
Thanks in advance Matt
Also I got the rc 750cc incjectors what would be the latency and k value on those
The map i am getting was meant to work with 720cc injectors and I got 750cc can I run it without any changes or should I manualy adjusts the k and latency then permanently burn it to my board ??
Thanks in advance Matt
Re: new to nistune from stock ca18det base map to 400bhp + m
Get the file again (the full file, not one with just a few maps in it)
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
Re: new to nistune from stock ca18det base map to 400bhp + m
I WILL COPY IT AGAIN, DOES IT MATTER WHEN I COPY THE MAP LIVE MY STOCK INJECTORS AND MAF OR DO I HAVE TO PUT THE Z32 AND MY 750CC INJECTORS THEN COPY IT??
WHATS THE BEST WAY TO COPY IT SAFE I HAVE UPDATED MY ROOM PACK SO ALL SHOULD BE GOOD NOW
LET ME KNOW SO I CAN DO THE BEST WAY
THANKS
WHATS THE BEST WAY TO COPY IT SAFE I HAVE UPDATED MY ROOM PACK SO ALL SHOULD BE GOOD NOW
LET ME KNOW SO I CAN DO THE BEST WAY
THANKS
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
Re: new to nistune from stock ca18det base map to 400bhp + m
I GOT NISTUNE BASE MAP ON MY CA18 STOCK INJECTORS AND MAP WOULD THAT DISTURB THE NEW PLUGGED ECU THAT I AM GONNA USE TO COPY THE MAP OR IT HAS TO BE COPIED WITH THE 720CC AND Z32 MAF ??
-
- Posts: 6
- Joined: Tue Nov 04, 2014 12:50 pm
Re: new to nistune from stock ca18det base map to 400bhp + m
What is happening in this thread?
Re: new to nistune from stock ca18det base map to 400bhp + m
What appears happened is you yelled in the thread (CAPS) and no one responded
I've got a tune (attached) which is for Z32 MAF/750CC (close enough starting point) for you to upload and try out to see if it starts
After warming up, see if you can get cruise around 14.7:1 and you should be good
Whatever the previous tune from your friends vehicle that was downloaded resulted in a dud file which could not be used to assist you
I've got a tune (attached) which is for Z32 MAF/750CC (close enough starting point) for you to upload and try out to see if it starts
After warming up, see if you can get cruise around 14.7:1 and you should be good
Whatever the previous tune from your friends vehicle that was downloaded resulted in a dud file which could not be used to assist you
- Attachments
-
- S13_CA18DET_39F00_Z32MAF_750CC.bin
- Base tune Z32/750CC
- (16 KiB) Downloaded 383 times
-
- Posts: 14
- Joined: Thu Jul 31, 2014 12:24 pm
Re: new to nistune from stock ca18det base map to 400bhp + map
sorry for the confusion , when i wrote this msg my phone was playing up