Using Launch Control for Type One

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
svimlesh
 

Posts: 1
Joined: Fri May 23, 2014 2:11 pm

Using Launch Control for Type One

Post by svimlesh »

Hi all, has anyone tried using launch control feature on Nistune? i have not yet starting using Nistune as i am already on my way building Fresh from scratch. So i was exploring the Nistune Software and came across this (attached Print-Screen).

How do we setup the launch control and how is this linked to the e-brake or TPS or Speed Sensor, etc. I had Bee-R Launch Control on a stock ECU and this was hooked up to my e-Brake and on launch my boost would hold up to a set rev (e.g. 4k RPM) then once i launch and the e-brakes down, i have an osem launch and can rev up to a high rev limit (say 7K RPM).

So how does the one in Nistune Work????

This is my build for RB20DET: https://www.facebook.com/fearmefiji
Attachments
Launch Control.png
(67.67 KiB) Downloaded 2300 times
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Using Launch Control for Type One

Post by Matt »

HCR32 RB20 is a Type 2 board

All information on launch control is here:
viewtopic.php?f=12&t=2874
Feature pack documentation is on the website to cover its operation
Post Reply