Using Launch Control for Type One
Posted: Fri Nov 14, 2014 10:46 am
Hi all, has anyone tried using launch control feature on Nistune? i have not yet starting using Nistune as i am already on my way building Fresh from scratch. So i was exploring the Nistune Software and came across this (attached Print-Screen).
How do we setup the launch control and how is this linked to the e-brake or TPS or Speed Sensor, etc. I had Bee-R Launch Control on a stock ECU and this was hooked up to my e-Brake and on launch my boost would hold up to a set rev (e.g. 4k RPM) then once i launch and the e-brakes down, i have an osem launch and can rev up to a high rev limit (say 7K RPM).
So how does the one in Nistune Work????
This is my build for RB20DET: https://www.facebook.com/fearmefiji
How do we setup the launch control and how is this linked to the e-brake or TPS or Speed Sensor, etc. I had Bee-R Launch Control on a stock ECU and this was hooked up to my e-Brake and on launch my boost would hold up to a set rev (e.g. 4k RPM) then once i launch and the e-brakes down, i have an osem launch and can rev up to a high rev limit (say 7K RPM).
So how does the one in Nistune Work????
This is my build for RB20DET: https://www.facebook.com/fearmefiji