z32 ecu not firing no.6 injector :(
Posted: Wed Dec 17, 2014 5:03 pm
hey, new to this forum and new to the skyline game
I have a z32 ecu with the type2 nistune chip fitted
when getting my initial tune the tuner said I had one 'injector driver' burn out which he said he fixed by piggybacking off another driver. the car had a full time and has been running for about 6 months. ( had a falling out with the initial tuner sadly and have now found a much better tuner who completed a second time when I upgraded parts)
I am now experiencing a continuous miss in cylinder 6. I have checked the ignition side of things which tested fine.(swapped coilpacks and plugs around) and have ruled out a stuck injector by getting them flow tested. also I checked my woring harness and I have continuities from the injector plug through to the ecu pin.
I have opened up the ecu looking for any signs of burn marks but can't seem to find anything..
does anyone have experience with injector drivers or know any further tests I can complete
thanks
I have a z32 ecu with the type2 nistune chip fitted
when getting my initial tune the tuner said I had one 'injector driver' burn out which he said he fixed by piggybacking off another driver. the car had a full time and has been running for about 6 months. ( had a falling out with the initial tuner sadly and have now found a much better tuner who completed a second time when I upgraded parts)
I am now experiencing a continuous miss in cylinder 6. I have checked the ignition side of things which tested fine.(swapped coilpacks and plugs around) and have ruled out a stuck injector by getting them flow tested. also I checked my woring harness and I have continuities from the injector plug through to the ecu pin.
I have opened up the ecu looking for any signs of burn marks but can't seem to find anything..
does anyone have experience with injector drivers or know any further tests I can complete
thanks