Nistune Forums

Hy
Sorry for my bad english , I 'm from Germany ; )
I have the following problem :
I have downloaded the new update NIStune two weeks ago , I got out the map changed and played at my Nissan 200SX S14 SR20DET !
Yesterday I wanted to go a round but my engine revs up only idle when I chop down a gear inlay on the leerlaufdrezahl 700rpm and the ignition to 0 degree
The motor can then not turn up as 2300 rpm , this feels like Lunch control what but I've never set !
Me is also in the list NIStune the option "idle rpm gear timing) noticed that I 've never had ...
In the stand I also do not come in 15 degree ignition whether "base idle adjustment" or not : /
Can someone help me?
Many times already, thanks !
Best Regards

Please post your BIN file here so we can have a look

ohh sorry , of course , here the file & the Speclist :

SR20DET

550jecs inj.
Open air filters
Walbro fuel pump
XS intercooler
3 " Turbo Back

I would be very grateful for the help!

Best Regards

Everything looks okay in the tune. Except feedback control flags

Set all flags to 'ticked' and see if that fixes the problem. If not then will need a log file (stream mode) of the problem

Have now tried everything , unfortunately, no change !
it seems as if he were in the close loop timing map run in stand !
when I first gear marquetry it jumps to 0Vot

Can you take a log file?

yes I will perform tonight !
what parameters ?
at a measurement that struck me the most is the power transistor in the ass , this could be the cause ?

RPM, TP, ignition time, injection time, temp, AFRs etc

sorry here the log file: