Hiflow Tune for HCR32

[Old Booster]

Hello all,

If anybody could share their tune file for a hi-flowed RB20DET with Z32 AFM and GTR injectors It would be greatly appreciated. I've just had my stock turbo hi flowed by Hypergear and want to get something to run around with before I get it tuned professionally.
Its an Auto if that makes any difference?

Cheers Mike.

[Old Booster]

no one can help?

[Matt]

Probably no one has that particular setup... not to mention there are varying specifications of highflow turbos and the tunes can very between vehicles

I would recommend doing the MAF and injector resize in the software to get the car running for now until you can get it to a dyno

[Old Booster]

Probably no one has that particular setup... not to mention there are varying specifications of highflow turbos and the tunes can very between vehicles

I would recommend doing the MAF and injector resize in the software to get the car running for now until you can get it to a dyno

Yeah I have done this, just was not certain on how safe it was to drive around, was hoping someone would have the same injector/ AFM setups.

[Matt]

Hold @ 2000rpm when warmed up. Watch STFT and LTFT trims (assuming good working narrowband O2 sensor in vehicle)

Adjust K constant (Injection multiplier) until those trims are close to 0% when you have this right then should be good to drive to the tuners.

[Old Booster]

Thanks Matt, will give that a try.