Hi, first of all I wan't to say all SORRY! I'm Spanish and my english is so bad
I buy a nistune for a ca18det and I need a base map for my car that mounts 560cc evo injectors, z32 maf and gt2871r, now at 2.2 bar, but if someone has a rom to 1-1.5 bar it's perfect... later I will adjust this tune..
Thanks for all!!
ROM for 560cc evo injectors and Z32 MAF?
Moderator: Matt
Re: ROM for 560cc evo injectors and Z32 MAF?
Hola Acid, feel free to PM me in Spanish and I can try to help you out as much as possible with your Nistune questions.
I've only been using Nistune for about 3 months, so I will refrain from providing you my ROM, as it haven't been dynoed and I still have a couple of Boost leaks to deal with, before I think it's "safe".
My recommendation would be that you and/or your tuner read all the documentation available in the main Nistune website, and then use the forums to make the most sense out of it. Always be extremely careful with whatever ROM you download, and learn to understand it before you go full boost on it.
Good Luck!
I've only been using Nistune for about 3 months, so I will refrain from providing you my ROM, as it haven't been dynoed and I still have a couple of Boost leaks to deal with, before I think it's "safe".
My recommendation would be that you and/or your tuner read all the documentation available in the main Nistune website, and then use the forums to make the most sense out of it. Always be extremely careful with whatever ROM you download, and learn to understand it before you go full boost on it.
Good Luck!