Page 1 of 1
Topics on other forums about NIStune
Posted: Fri Jun 01, 2007 1:49 am
by ByReaL
Posted: Fri Jun 01, 2007 3:45 pm
by Matt
The timing map -11 [corrected] is a bug and i've fixed that. i was applying the offset twice to this value
I'll need to have a look at the log player functionality to do with the flags (normal/knock) on playback and test this out on the bench
The register for the switches etc is normally 'standard' for most nissan ecus but the power steering switch might be something else for CA18....
Timing is degrees BDTC
The image I am probably looking at is JDM for knock sensing. This code may be different for european. Might have to differentiate code from both models
You can post any of this to that forum if you wish