Help me fix my consult cable (pics inside)
Posted: Fri May 08, 2015 3:50 am
EDIT: Solved
Need some help please to repair my Blazt cable bought approx 4-5 years ago
Brown (more faded colour) and Orange (stronger colour) have became detached and I don't know which way round I need to solder them back in. I don't want to damage anything, particularly my ECU so thought it would be best to ask rather than trial and error.
I had a look at the DIY cable guide but I couldn't figure it out.
A. has a track going to that 3 leg component (KZ3 T3), the track leads to the single leg of the component.
I can't really work out were the track for B leads to.
EDIT: Updated
A= 4. CLK brown
B= 2. TX orange
C= 3. RX yellow
D= 5. GND black
E= 1. 12v red
Need some help please to repair my Blazt cable bought approx 4-5 years ago
Brown (more faded colour) and Orange (stronger colour) have became detached and I don't know which way round I need to solder them back in. I don't want to damage anything, particularly my ECU so thought it would be best to ask rather than trial and error.
I had a look at the DIY cable guide but I couldn't figure it out.
A. has a track going to that 3 leg component (KZ3 T3), the track leads to the single leg of the component.
I can't really work out were the track for B leads to.
EDIT: Updated
A= 4. CLK brown
B= 2. TX orange
C= 3. RX yellow
D= 5. GND black
E= 1. 12v red
