Nistune Forums

Hi
Strange thing ...
At WOT , ECU retards ignition until 4k RPM, and then at EXACTLY 4k RPM it adds 4-5 deg.
After that timing is almost value from the map, but i think still 1 deg retarded on 3-4 gear.
I removed knock sensing from the map.

Map and log attached.

If you disconnect your knock sensor do you get the same issue?

Its like the ECU is pulling knock still (which it can do even with knock flags disabled. Normally those cells with knock sense enabled are used for pulling liming in knock limp mode, and the area used to determine if to switch to knock maps)

Heh, didn't have a chance, engine blown
Propably one of valves broke down.