Page 1 of 1
Problems flashing featurepack
Posted: Tue May 26, 2015 2:14 am
by Tommey
Trying to flash the featurepack to my type 4 Board.
I can`t find an exact match to my ECU so i tried the one marked in the Attached photo.
Does not work.
Wich one to use?
Thanks!
Re: Problems flashing featurepack
Posted: Tue May 26, 2015 11:57 am
by Matt
Use 82F0F (replaces anything with 82F0x in it)
Re: Problems flashing featurepack
Posted: Tue May 26, 2015 3:32 pm
by Tommey
I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
Re: Problems flashing featurepack
Posted: Wed May 27, 2015 1:43 am
by unex
Tommey wrote:I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
I would suggest you to explain in details what does it mean "I tried that one with no success."
Re: Problems flashing featurepack
Posted: Wed May 27, 2015 3:56 am
by Tommey
After flashing I got adress file mismatch and when I load my map it won't start.
Re: Problems flashing featurepack
Posted: Wed May 27, 2015 8:11 pm
by Matt
Make sure you use the matching feature pack base map S14_SR20DET_82F0F_MT_EDM_FP_maps.bin
If you have a previous tune, you cannot just load it over the top (there are new and different parameters) otherwise it will mess up everything added to feature pack
Use File > Import to convert a previous tune to one for feature pack
Re: Problems flashing featurepack
Posted: Fri Jun 05, 2015 7:56 am
by Tommey
I have tried again with no success.
There isnt any EDM FP maps so i tried ADM and JDM.
I need a step by step explanation so i can get this up and running.
Re: Problems flashing featurepack
Posted: Mon Jun 08, 2015 2:32 pm
by Matt
I see the problem... the 75F0F maps are not in the latest ROM pack
Attached are the files. Unzip them and put them in your Documents\Nistune\ROM_Pack\Type34\S14A_SR20DET folder
1. After this connect to your ECU
2. Load the S14_SR20DET_75F0F_MT_NATS_EDM_FP_maps.bin from this folde
3. File > Import > your previous tune
4. Upload to ECU
It should work from here. I'll fix the ROM pack up now to include this file
Re: Problems flashing featurepack
Posted: Wed Jul 08, 2015 2:58 am
by Tommey
This solved my problem, thanks Matt!
Re: Problems flashing featurepack
Posted: Sun Jun 05, 2016 2:06 am
by Tommey
This firmware does not support fans? I have to run them manually.
Have to change the firmware for a newer one?
Re: Problems flashing featurepack
Posted: Mon Jun 06, 2016 2:32 pm
by Matt
Fan control temperature is adjustable in this feature pack version for S14/S14A/S15
Refer to the feature pack software guide for adjusting them