Page 1 of 1
Stupid question maybe?
Posted: Wed Jul 01, 2015 8:13 am
by groundscraper
I´ve ordered a nistune type 3 board for my N14 gti. I´m currently running a chipped pulsar gti-r ECU, the car is turbocharged.
Don´t mock me, i´m new to this, but is there any way of downloading the maps from the chipped ecu to the nistune, once i install it?
I want to start where i left, the tune is almost spot on, except for timing on boost...
Thx in advance
Re: Stupid question maybe?
Posted: Wed Jul 01, 2015 1:47 pm
by Matt
Yes you can download the maps via consult (assuming the chipped file isnt locked) and then upload to the Nistune board
Most likely the Nistune board has feature pack, so you will need to
1. Connect to nistune board, download maps
2. File > Import saved file from chipped board
3. Upload to Nistune board and check
Re: Stupid question maybe?
Posted: Thu Jul 02, 2015 2:27 am
by groundscraper
Oh awesome... great news... i like how the car runs... just don´t like the knock high up in the RPM.
Don´t know if it´s locked or not... how to check? This is what i have inside the ECU:
I found 0 on the interwebs, i know the ecu came from a japanese gti-r imported to UK... anyone know something about "big value" Special engine builders?
Thks Matt
Re: Stupid question maybe?
Posted: Thu Jul 02, 2015 1:10 pm
by Matt
There are lots of small japanese outfits which have their own names. You will just have to try it once you have your consult cable and licence to do the download
Operations > consult download ROM image
Re: Stupid question maybe?
Posted: Thu Jul 02, 2015 9:29 pm
by groundscraper
I do have the license and cable... nistune is in a plane or ship somewhere...
So i could do it right now!
Re: Stupid question maybe?
Posted: Tue Jul 14, 2015 7:25 am
by groundscraper
My 2015 bad luck continues... what a year it´s been...
My type 3 board is one of the faulty... and i can´t run nistune software either, i get "mfc100.dll missing from your computer"
How can i solve this safely? Thx in advance guys
Re: Stupid question maybe?
Posted: Tue Jul 14, 2015 8:48 am
by Matt
Install Microsoft Visual Studio 2010 redistributable
http://www.nistune.com/support-downloads.php
How is the Type 3 board faulty? What issues are you seeing with it?
Re: Stupid question maybe?
Posted: Tue Jul 14, 2015 7:40 pm
by groundscraper
I ordered trough lets-d motorsport in Lithuania, he said the board was not ok... i didn´t recieve it yet...
Re: Stupid question maybe?
Posted: Tue Jul 14, 2015 10:16 pm
by Matt
He could not program board, so I'm sent him a replacement today (should be 3-5 business days to arrive). Will check out the boards when we get them back (suspect it may be voltage regulator)
Re: Stupid question maybe?
Posted: Wed Jul 15, 2015 12:26 am
by groundscraper
Tks Matt, precious help...
I managed to pull my chipped ecu .bin and here´s a little comparison against stock JDM GTIR.
Re: Stupid question maybe?
Posted: Wed Jul 15, 2015 8:04 am
by Matt
Yeah not much change in that tune file
