Page 1 of 1
Innovate SCG-1 nistune connected but no AFR showing in AFR
Posted: Mon Aug 17, 2015 3:02 pm
by louiswun
SCG-1 can be connected to LM programmer, it also connected to nistune on WB1, but no AFR showing in the small window, just everything black out.
Could SCG-1 work with nistune ?
My MTX-L used to be work fine on eariler version of nistune, but does not work on lastest test release.
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Mon Aug 17, 2015 3:46 pm
by Matt
Please email File > Config > Debug log file to me or post here
Please also confirm Logworks displays AFRs correctly, since Nistune just uses Logworks output
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Fri Sep 04, 2015 5:27 am
by louiswun
Tried Logworks snd its display correctly. But I've forgot the debug log, will do tomorrow.
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Fri Sep 04, 2015 3:45 pm
by Matt
Use ALT-PRINTSCN for screenshots
Okay will need a log file...
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Tue Sep 15, 2015 6:39 pm
by louiswun
Here is the logs on the SCG-1
WB1 Connected, AFR window black screen, input tracer did not show any Innovate AFR for selection.
Same notebook, same DB9 to USB coversion cable, same version of nistune, it can connected to MTX-L on another S13 CA18DET 23710-36F00 Type 1 board ECU.
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Thu Sep 17, 2015 1:06 pm
by Matt
When taking debug log files of wideband messages, do not have consult also connected! It fills up the log with consult data also and makes debugging more difficult
Anyway all I see is
07:34:56.671 Wideband 1: OnSelMTSConnect: Detected ports 1
07:34:56.671 Wideband 1: OnSelMTSConnect: Attempting connection to 0 COM4
07:34:57.171 Wideband 1: OnConnectionEventMts: 0
07:34:57.203 Wideband 1: Number of MTS inputs: 0
07:34:57.203 CWidebandCommon::UpdateWidebandConnected: 0 Connection 0
Messages OnNewDataMTS(1)... and that is it
Log works is reporting through its DLL that there are no wideband inputs.
Please download software developers kit
http://www.innovatemotorsports.com/support.php
http://www.innovatemotorsports.com/supp ... KSetup.zip
Then run the VB sample. Let me know if you see your device and data in this sample. If you do not then MTS is broken and innovate will need to fix it. You will need to raise a support request with Innovate
Innovate MTS is telling Nistune when we connect there there are no inputs (0) when I query the DLL so not much I can do from this end
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Fri Sep 18, 2015 9:44 pm
by louiswun
Screen Capture
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Fri Sep 18, 2015 9:45 pm
by louiswun
Screen Capture
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Fri Sep 18, 2015 9:45 pm
by louiswun
Hi Matt, there is no data in VB, what can I do ?
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Sat Sep 19, 2015 5:05 pm
by louiswun
Problem solved, uninstall LogWorks and any related program, reinstall all latest version.
VB works and MTS can show up in Nistune.
Thanks Matt.
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Sun Sep 20, 2015 11:41 am
by Matt
Good you got it sorted. Must have been problem with older version of Logworks?
Re: Innovate SCG-1 nistune connected but no AFR showing in A
Posted: Sun Sep 20, 2015 1:41 pm
by louiswun
I think so, when the older version Logworks first install, SCG-1 has not been launch on the market.