Nistune Forums

Posted: **Thu Dec 10, 2015 5:31 am**

Running z32 MAF, no MAP sensor and 1000cc injectors. I've set it up and the vehicle starts, idles, and drives well but in software all the 3d tables only recognize the first column of load. MAF voltage is moving, RPM is recognized by the ECU so why wouldn't it be calculating load? Any help would be greatly appreciated.

Board type is ER34 skyline, base map file was "ER34_RB25DET_AA50F_MT_FP_maps"

I know I'm probably missing something really simple. Any help would be appreciated.

Posted: **Thu Dec 10, 2015 5:39 am**

Search button! lol. Fixed the problem reading a further thread.

Display -> Select Consult Monitors -> select BFuel Schedule.

You can delete this thread if you want or leave it up to help anyone else who might have this issue.

Thanks

Posted: **Tue Dec 22, 2015 8:47 am**

Thats fine - I'll leave it here. Need to force it on again somehow

Nistune Forums

RB25NEO in s13 240sx not recognising load.

RB25NEO in s13 240sx not recognising load.

Re: RB25NEO in s13 240sx not recognising load.

Re: RB25NEO in s13 240sx not recognising load.