Page 1 of 1
vct triggerd via egr
Posted: Wed Jan 13, 2016 6:20 pm
by boostjunkie
anybody help me with the vct being triggered via the egr solenoid my bnr32 nistune ecu has some vct settings pop up with the feature pack update is it triggered via ac pin like r32 rb20det or ive read its egr , what pin would this be as the bnr32 gtr ecu pinout does not show it?
Re: vct triggerd via egr
Posted: Thu Jan 14, 2016 9:01 am
by Matt
This setup was done for a japanese customer using R32 RB26DETT with VCT module. Addresses were added to the feature pack to support this setup
It is not done using EGR but fuel pump output (same as R32 VCT activation for RB25 - see Feature Pack hardware manual)
However your board needs the RB26 VCT firmware loaded into it to use it (not in there with the default FP firmware)