Sincronization betwen logged data

[ByReaL]

I know that the log player is under construction


look at the attached file and select for example
TPS (from ECU)
Aux3 (WBo2 unit Aux3 input is connected to TPS wire just before the ECU)
RPM
AFR


you will notice that there is a desincronization betwen logged data from WBo2 unit and the data from the ECU


doing that automaticaly i belive it is hard or imposible, but will be nice to give the user the ability to sincronize this 2 by introducing a variable named desincronization time in miliseconds,

and base on the value provided by the user to sincronize the logged data.


i belive it will be verry hard to try to implement an algorit that will automaticaly sincronize the data

look at the red and blue line

[Matt]

the techedge data can get two/three frames buffered some times. it is a fair gap between received and actual data. what i can do is try and always use the last buffer.

those should idealy be in sync! see what we can do. i'll put TPS/MAF on the bench into the wideband too and see if i can get them lining up