Page 1 of 1
my ignition map looks strange in 3D
Posted: Sat Jul 07, 2007 7:11 am
by ByReaL
0.9104
attached an image and a bin file, few versions ago it looked fine on 3d view
i do not know if this is a bug, i noticed that is just diferent from the previous versions (i noticed you did some fixes on flag thing)
Posted: Sat Jul 07, 2007 11:16 am
by Matt
thanks for letting me know. i have been updating the flag -> display determination. tested on quite a few images, but not CA18. I'll look at this one and see why > 64 (0x40) it is having probs
Also i noticed some probs with log player not updating all registers too that needs to be looked into again with this version
Posted: Sat Jul 07, 2007 9:20 pm
by LMQT
Exactly the same problem for me (same car, same board AFAIK).
And onother one : the (estimated) AFR is not always the same on the map and on the graph for the lowest part of the fuel-map.
Posted: Sun Jul 08, 2007 12:33 am
by Matt
okay i've fixed both problems tonight. it has to do with:
(a) filtering the O2 flags will affect AFR calculation (affected cursor readout values on graphic map window)
(b) CA18 offset needed to be applied before applying filtering to timing values
Posted: Sun Jul 08, 2007 2:41 am
by LMQT
Your a chief Matt
