Page 1 of 1
request 11U0F_TPS without VCT function
Posted: Fri Sep 30, 2016 9:09 pm
by bachig24u
Matt,
Do you have an FP.ent for 11U00 that only has the TPS functionality but not the VCT function?
I ask this to assist in troubleshooting a strange random idle behavior after 60deg.
I've found that switching from an FP_11U0f TPS_VCT base to the basic FP 11u0f base seems to resolve the issue but it creates a decel issue as we can't use stock RB20 TPS to activate TPS 'on' in consult.
KR
Sime.
Re: request 11U0F_TPS without VCT function
Posted: Tue Oct 04, 2016 1:38 am
by Matt
In short no I dont...
VCT code only sets a parameter (either AC flag, LED register flag or VFC flag) when activated. Use the LED version (which would have no other side effects on operation of ECU). Set TP = 255 to ensure it is never enabled
TPS code more likely the cause of decel issue you are seeing
Re: request 11U0F_TPS without VCT function
Posted: Thu Oct 06, 2016 8:42 am
by bachig24u
What will it cost us to have a special TPS only FP build when you're back in action?
Re: request 11U0F_TPS without VCT function
Posted: Wed Oct 12, 2016 11:45 pm
by Matt
I can probably put together a version without any real work required, just edit out the VCT part of the script. Email me Tuesday next week or later. Monday is looking crazy busy at the moment with catchup. Even during holidays spending 2 hours/day on the laptop
Re: request 11U0F_TPS without VCT function
Posted: Thu Oct 13, 2016 7:12 am
by bachig24u
Ok. Will do.
Thanks Matt.
Re: request 11U0F_TPS without VCT function
Posted: Tue Oct 18, 2016 7:14 pm
by Matt
Emailed a copy of the ENT file just made
Re: request 11U0F_TPS without VCT function
Posted: Wed Oct 19, 2016 7:40 am
by bachig24u
Thank you Matt.
I had this on my list to follow. Appreciate it very much.
Re: request 11U0F_TPS without VCT function
Posted: Sat Dec 24, 2016 7:50 am
by bachig24u
Works a treat.