Page 1 of 1
Type 1 ca18det dwell settin for bosch coils
Posted: Mon Feb 27, 2017 9:43 am
by Datto1600ca1det
Hi guys
This is my first post
Im runnin a type 1 board in my ca18det and i have just changed over to a bosch coil early vt 5.0l i think and i need to adjust the dwell to suit but i cant find what there dwell settin should be and my dwell settins currently look a bit out of whack
Re: Type 1 ca18det dwell settin for bosch coils
Posted: Mon Feb 27, 2017 11:12 am
by Matt
Yes they look out of wack. Only modify the dwell vs voltage table
There should be a 'dwell time' guage which you can look at to see the current ms (dwell charge time) estimated by the software. The dwell time from memory is about 3.5ms so if you double the default values in the dwell/volt table it will effectively make it about 7ms for example
Re: Type 1 ca18det dwell settin for bosch coils
Posted: Mon Feb 27, 2017 3:46 pm
by Datto1600ca1det
Cheers for the reply is that the dwell time table i need to change
noob question
Re: Type 1 ca18det dwell settin for bosch coils
Posted: Mon Feb 27, 2017 8:31 pm
by Datto1600ca1det
Here is a veiw of all consult guages while.runnin
Re: Type 1 ca18det dwell settin for bosch coils
Posted: Tue Feb 28, 2017 1:30 pm
by Matt
replied via email. Also your other post on the Type 1 tune thread
Re: Type 1 ca18det dwell settin for bosch coils
Posted: Tue Feb 28, 2017 4:09 pm
by Datto1600ca1det
Cheers Matt