Nistune Forums

Hi all

I got ECU from 200sx S13 with ka24e engine with ECU number A11-B15G11 0205 and inside of the ecu with G280AFM8 at the eprom sticker. Im not sure which address file is correct for this ecu (and for nistune board configuration)?

Thank you for your help

S13 KA24E 240SX 89 USDM 40F05 N M F A11-B15 G11

Type 1 board and we have 40F01 as closest part number for this ECU in the ROM pack

Thanks for the info Matt. May I also ask if this ECU can directly accept 0-5V AFM or use 2-7V offset and have to be hardware adjusted for 0-5V AFM types?

Thank you

Direct 0-5 volt input on this ECU. Only the older Z31/R31 models (1984-1989) use the 2-7 volt MAFs