Anomaly in accessed cells during log
Posted: Fri Sep 22, 2017 11:50 am
I'm tracing a misfire issue that seems to be fuel related based on what I've found so far. The car won't go WOT without a strange acceleration cut of some sort.
I was reviewing the logs and watching the trace on the fuel map and noticed the light and dark grey cells move around normally but then during the exact moment of acceleration cut at WOT the fuel map highlights some of the highest load cells with blue but the grey cells are still where they would be expected to be. Am I maxing out my load scale or something?
I'm not certain if this is an artifact of the engine cut I'm encountering but thought maybe this special blue cell indicates something.
Thanks for any help you might have. Check out the screen cap I attached.
I was reviewing the logs and watching the trace on the fuel map and noticed the light and dark grey cells move around normally but then during the exact moment of acceleration cut at WOT the fuel map highlights some of the highest load cells with blue but the grey cells are still where they would be expected to be. Am I maxing out my load scale or something?
I'm not certain if this is an artifact of the engine cut I'm encountering but thought maybe this special blue cell indicates something.
Thanks for any help you might have. Check out the screen cap I attached.