Nistune Forums

Hi everyone,

I am new here. I have a type 3 board on my Sr20det swapped s13 and i want to switch the ecu from WE to WH sense the WE is a AT and i converted my car to manual.

Do I have to reprogramm the base image on the nistune board?

Old ecu: 69F10 - base image on nistune board
New ecu: 75F00 - stock

Thanks in advance.

We do not work from the two letter ECU codes. There is no official reference for those

Please use the Nissan part #23710-xxxxx for what is on the lids.

69F10 is JDM AT S14 SR20DET. New ECU 75F00 is EDM MT S14 SR20DET

I would advise reflashing board to 75F0F (Feature pack). You might get away with the older JDM image however

Hi,
Sorry.
The full codes are:

Old ecu: 23710 69F10
New ecu: 23710 75F00

Do i need the base image programmer for the reflash?

Yes or send to a dealer or myself for reflash