Page 1 of 1
Unique identifier / serial number ?
Posted: Mon Oct 29, 2018 1:15 pm
by CoZZm0
Hi all, is there any kind of unique identifier / serial number embedded in the ECU's for S13/14/N14/15 type units that would be accessible through consult and would definitely be unique to each unit ?
Re: Unique identifier / serial number ?
Posted: Tue Oct 30, 2018 9:03 am
by Matt
No there is not. The ENT file put in the board during programming contains the same program regardless of which board.
Ideally if I had thought about it 10 years ago, I could have added a unique identifier during programming (it would change each program, but would have to be based from a date/timestamp) but the memory location would have to vary depending on the ECU which in itself is difficult to implement
Re: Unique identifier / serial number ?
Posted: Tue Oct 30, 2018 11:48 am
by CoZZm0
Aside from having a Nistune board installed the base ECU itself doesn’t have anything either ?
Re: Unique identifier / serial number ?
Posted: Wed Oct 31, 2018 2:42 pm
by Matt
No it doesn't. Only the later models (FLASH) would have the VIN encoded with it