Page 1 of 1
PLX iMFD Connection
Posted: Mon Oct 14, 2019 5:55 pm
by nismoS14
Nistune Version 1.3.11
Only AFR is displayed on the wideband screen.
Why aren't SM-EGT, SM-VAC / BOOST, and VOLTS displayed?
→Of course, everything is displayed in PLX guage.
Re: PLX iMFD Connection
Posted: Wed Oct 16, 2019 10:22 am
by Matt
06:24:07.877 Entry: 0: Instance: 0 Address: 3 Raw Data: 129
06:24:07.877 Entry: 1: Instance: 0 Address: 4 Raw Data: 0
06:24:07.877 Entry: 2: Instance: 0 Address: 1 Raw Data: 294
06:24:07.877 Entry: 3: Instance: 0 Address: 0 Raw Data: 119
06:24:07.877 Entry: 4: Instance: 0 Address: 18 Raw Data: 712
06:24:07.877 Entry: 5: Instance: 0 Address: 25 Raw Data: 101
06:24:07.877 Entry: 6: Instance: 0 Address: 26 Raw Data: 1000
All data is being received. If you right click to add item to display, you don't see those channels listed? I'll have to try it out here
Re: PLX iMFD Connection
Posted: Mon Oct 28, 2019 1:30 am
by nismoS14
Consult log: will be displayed
Wideband screen: Not displayed
Look at the attached file
Re: PLX iMFD Connection
Posted: Wed Oct 30, 2019 10:30 pm
by Matt
Okay they are in the log, so you can right click an add them to the gauges. So what you can do is right click, add number gauge for each input you need (like EGT and boost) instead of using the older wideband window.
They are not available in the 'wideband' window at the moment since the PLX inputs are special and are device configuable. It was difficult to tie them to the AUX1-AUX6 hard coded inputs in the 1.3 updates compared to other units
Re: PLX iMFD Connection
Posted: Fri Nov 01, 2019 10:50 pm
by nismoS14
OK.
Thank you.
Re: PLX iMFD Connection
Posted: Sun Dec 15, 2019 5:27 pm
by Matt
Fix made for next release. Tested live and playback iMFD