Page 1 of 1
Missing values / sources
Posted: Tue May 26, 2020 9:52 pm
by Shaker
Hello.
I updated from 1.3.21 to 1.3.24 and have the problem, that some live values are not available anymore. After recording a log, I noticed that TP load Index wasn't logged. Some other values are also missing. I attached some screenshots. They are missing in the gauges selection as well.
Can somebody tell me, what went wrong? And how can I fix this?
I removed nistune and its feature/rom packs, intalled it again, but still have this problem.
Re: Missing values / sources
Posted: Wed May 27, 2020 9:47 pm
by Matt
Okay will have a look into this, the TP load index and duty % are calculated parameters
Re: Missing values / sources
Posted: Thu May 28, 2020 10:57 pm
by Shaker
Thanks,
one more information: When I downgraded to .21 without improvement. The TP load index is gone. Even applying a recovery of the Windows partition (with nistune installed) didn't help. I must say, that the user folder of nistune was not touched by this, since it's on a different partition.
After this I did an uninstall and reinstall of .24. No success. I haven't checked or cleaned the registry values here.
Re: Missing values / sources
Posted: Sat May 30, 2020 1:02 pm
by Matt
Will put up a fix this weekend once I've checked it here on an ECU. Sorry its been a really busy week
Re: Missing values / sources
Posted: Sun May 31, 2020 9:20 pm
by Matt
Version 1.3.25 going up tonight
Re: Missing values / sources
Posted: Tue Jun 02, 2020 5:23 am
by Shaker
Strange. It worked once with .21 but on a fresh install (new OS, fresh nistune installation) it didn't with the same .21 version.
But you made it work again with version .25, thank you for this awesome quick fix!
Re: Missing values / sources
Posted: Tue Jun 02, 2020 11:33 pm
by Matt
No probs. Sorry I broke it
I've removed some of the parameters which are not available in stream mode so they don't log, but it affected other things
Re: Missing values / sources
Posted: Wed Jun 10, 2020 10:48 pm
by cmsperformance
i only just updated today and noticed the same thing tuning an R31. I just restarted Nistune and the Trace & TP Index came back
Re: Missing values / sources
Posted: Thu Jun 11, 2020 12:47 pm
by Matt
Yeah it would have affected all Type 1 boards (and previously stream mode in the few versions before hand). I should have that all solid now so an upgrade recommendation is made on starting to use 1.3.25
Re: Missing values / sources
Posted: Thu Jun 11, 2020 11:03 pm
by Shaker
Matt wrote: ↑Thu Jun 11, 2020 12:47 pm
Yeah it would have affected all Type 1 boards (and previously stream mode in the few versions before hand). I should have that all solid now so an upgrade recommendation is made on starting to use 1.3.25
Oh, maybe that's why downgrading and a fresh installation didn't help in my case. I had accidentally switched to Steaming mode instead of Tuning mode? It doesn't make a difference for Type1 boards, as far as I know, that's why I usually don't pay attention to this button.