Small screen support for Application.

[vanepico]

Hi Matt,

I know I may be in the minority, but I run nistune on an antique Asus Eeepc with a max resolution of 1024x600. The problem is the buttons on the toolbar go off the screen after the burn eeprom button, and I think occasionally the mapping windows will actually spawn off the screen.

Can there be a small screen mode, something that makes the icons smaller or in two lines, and ensures all windows open in the display boundary?

[Matt]

There is an option File > Configuration > Misc Settings > 'Hide emulator/WB2' to reduce the amount of buttons

You should be able to fit all the buttons in with this.

We used to have large/smaller buttons but the smaller ones were too tiny (especially on high DPI)

[Matt]

Pic posted above is 1024 x 600 (well 768 but I resized it down to about 600)

[vanepico]

Ah thank you, I'd forgotten about that setting!

[TE27Levin]

Holly crap, good to know. I have been using an asus netbook for my nistune for years!

[Shane001]

I had the same problem. Unfortunately the hide emulator / WB2 button is not an option for me as I have 2x WB's I want/need to log.

If we had an option to just hide the emulator buttons this would help.

Mine is a Lenovo 8" tablet running Windows 10 Pro.

I was able to fix the problem by changing from the recommended resolution (1920x1200) to 1680x1050.

HTH someone else if they run into this problem

[Matt]

If we just drop the emulator buttons, that will still fit the screenshot above, so that is an option